GLOSSARY
Glossary-18 AEROSET
®
Customer Training Guide
94858-103 — July 2003
Result Error Code Error codes of the AEROSET System reported with the result.
Rotary Power Control
Switch
Turns the power ON/OFF for units other than the reagent refrigerator.
Run Progress Area Area of the Main Display that shows the progress of analysis.
Sample Arm Holds the Sample Probes. Carries the Sample Probes from the FastTrack™
Sampler or Sample Carousel to the Reaction Carousel.
Sample Blank Test Measurement used for correcting the absorbance data obtained during the Main
Read Time. There are two kinds of Sample Blank Tests (self blank and non-self
blank).
Sample Blank Test,
Non-Self Blank
Sample Blank Test used to eliminate the effect of endogenous substances.
Performed in a second Reaction Cuvette.
Sample Blank Test, Self
Blank
Sample Blank Test used to correct the absorbance for sample coloring due to
lipemia, hemolysis, bilirubin, etc. Performed in the same Reaction Cuvette.
To Next Page