Advantech EKI-7710E-2C User Manual

102 EKI-7710 Series User Manual
4.9.5.5 Lease Entry
To access this page, click Management > DHCP Server > Lease Entry.
Figure 4.98 Management > DHCP Server > Lease Entry
The ensuing table for Lease entry Table settings are informational only: IP Address,
Client Mac, Start Time, End Time and Type.
4.9.6 SMTP Client
Simple Mail Transfer Protocol (SMTP) is a protocol to send e-mail messages
between servers. SMTP is used to send messages from a mail client to a mail server.
SMTP by default uses TCP port 25.
4.9.6.1 Global Settings
The Global Settings page allows you to set the active profile for the SMTP client.
To access this page, click Management > SMTP Client > Global Settings.
Figure 4.99 Management > SMTP Client > Global Settings
The following table describes the items in the previous figure.
The ensuing table for SMTP Information settings are informational only: Active Pro-
file Id.
4.9.6.2 Profile Settings
The Profile Settings page allows you to select the server IP, the server port, and
sender mail for the listed profile.
Item Description
Active Profile Click the drop-down menu to select the profile status (None, 1 or 2).
Apply Click Apply to save the values and update the screen.

Advantech EKI-7710E-2C Specifications

General

Brand	Advantech
Model	EKI-7710E-2C
Category	Switch
Language	English