Advantech EKI-7710E-2C User Manual

EKI-7710 Series User Manual 103
To access this page, click Management > SMTP Client > Profile Settings.
Figure 4.100 Management > SMTP Client > Profile Settings > Profile Settings
The following table describes the items in the previous figure.
Figure 4.101 Management > SMTP Client > Profile Settings > Profile Target Mail
Settings
The following table describes the items in the previous figure.
The ensuing table for Profile Information settings are informational only: Profile ID
(click the drop-down menu to select a profile ID), Server IP, Server Port and Sender
Mail Address.
4.9.6.3 Sending Message
The Sending Message page allows you to setup the log message for use with the
SMTP client.
Item Description
Profile ID Click the drop-down menu to select the identification type for the pro-
file (1 or 2).
Server IP Enter the IP address to designate the server host.
Server Port Enter the port number to designate the port associated with the server
IP address.
Sender Mail Enter the email address of the sender client.
Apply Click Apply to save the values and update the screen.
Item Description
Profile ID Click the drop-down menu to select the identification type for the pro-
file (1 or 2).
Target Mail Enter the email address of the target client.
Apply Click Apply to save the values and update the screen.

Advantech EKI-7710E-2C Specifications

General

Brand	Advantech
Model	EKI-7710E-2C
Category	Switch
Language	English