Advantech EKI-7710E-2C User Manual

EKI-7710 Series User Manual 113
The following table describes the items in the previous figure.
The ensuing table for Diagnostic Alarm Information settings are informational only:
Diagnostic Alarm.
Figure 4.114 Diagnostics > DDM
The following table describes the items in the previous figure.
The ensuing table for Vendor Info settings are informational only: Refresh (click to
reload the vendor information), Port, Connector, Speed, VendorName, VendorOui,
VendorPn, VendorRev, VendorSn and DateCode.
4.11 Tools
4.11.1 IXM
The IXM tool is an industrial Ethernet switch solution to help the users deploy indus-
trial Ethernet switch hardware by allowing users with multiple, managed Ethernet
switches in the field to eliminate the need to individually connect to each device to
configure it.
Item Description
Diagnostic Alarm Click the drop-down menu to designate the announcement method:
Disabled, SysLog, E-mail, or SNMP.
Apply Click Apply to save the values and update the screen.
Item Description
High Alarm Click Enabled or Disabled to set the alarm state.
High Warning Click Enabled or Disabled to set the alarm state.
Low Alarm Click Enabled or Disabled to set the alarm state.
Low Warning Click Enabled or Disabled to set the alarm state.
Apply Click Apply to save the values and update the screen.

Advantech EKI-7710E-2C Specifications

General

Brand	Advantech
Model	EKI-7710E-2C
Category	Switch
Language	English