Advantech EKI-7710E-2C User Manual

44 EKI-7710 Series User Manual
4.4.6 System Time
To access this page, click System > System Time.
Figure 4.14 System > System Time
The following table describes the items in the previous figure.
Item Description
Enable SNTP Click the radio button to enable or disable the SNTP.
SNTP/NTP Server
Address
Enter the address of the SNTP server. This is a text string of up to 64
characters containing the encoded unicast IP address or hostname of
a SNTP server. Unicast SNTP requests will be sent to this address. If
this address is a DNS hostname, then that hostname should be
resolved into an IP address each time a SNTP request is sent to it.
SNTP Port Enter the port on the server to which SNTP requests are to be sent.
Allowed range is 1 to 65535 (default: 123).
Manual Time Click the drop-down menus to set local date and time of the system.
Time Zone Click the drop-down menu to select a system time zone.
Daylight Saving Time Click the drop-down menu to enable or disable the daylight saving
time settings.
Daylight Saving Time
Offset
Enter the offsetting variable in seconds to adjust for daylight saving
time.

Advantech EKI-7710E-2C Specifications

General

Brand	Advantech
Model	EKI-7710E-2C
Category	Switch
Language	English