Advantech EKI-7710E-2C User Manual

EKI-7710 Series User Manual 111
The following table describes the items in the previous figure.
The ensuing table for Logging Information settings are informational only: Logging
Service.
4.10.4.2 Local Logging
The Local Logging page allows you to designate a local target when the severity cri-
teria is reached.
To access this page, click Diagnostics > System Log > Local Logging.
Figure 4.111 Diagnostics > System Log > Local Logging
The following table describes the items in the previous figure.
The ensuing table for Local Logging Settings Status settings are informational
only: Status, Target, Severity and Delete (click to delete the desired target).
Item Description
Logging Service Click Enabled or Disabled to set the Logging Service status.
Apply Click Apply to save the values and update the screen.
Item Description
Target Enter the local logging target.
Severity Click the drop-down menu to select the severity level for local log
messages.
The level options are:
 emerg: Indicates system is unusable. It is the highest level of
severity
 alert: Indicates action must be taken immediately
 crit: Indicates critical conditions
 error: Indicates error conditions
 warning: Indicates warning conditions
 notice: Indicates normal but significant conditions
 info: Indicates informational messages
 debug: Indicates debug-level messages
Apply Click Apply to save the values and update the screen.

Advantech EKI-7710E-2C Specifications

General

Brand	Advantech
Model	EKI-7710E-2C
Category	Switch
Language	English