AGFA CR 30-X - Page 78

DD+DIS125.08E
Functional Description
Software / Hardware Compatibility Chart
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5 CR 30-X Chapter 2 / 4
01-2011 Type 5175/100/105/110/120/125 Agfa Company Confidential
1.1 Software / Hardware Compatibility Chart up to System Version 13 (≤ CRE_1509)
System Version 001 002 003 004 005 005A 006 007 008 009 010 011 012 013
Digitizer Software
CRE_1010A CRE_1206
1)
CRE_1309 CRE_1309 CRE_1309 CRE_1309A CRE_1405 CRE_1405 CRE_1405 CRE_1509
CRE_1405
CRE_1509
CRE_1405
CRE_1509
CRE_1405
CRE_1509
CRE_1405
CRE_1509
System changes
compared to previous
version
Initial release Introduction
CRE_1206
Introduction
CRE_1309
Introduction
NX 2.0
Discovery
FLFS Phase 0 Introduction
1309A
Digitizer
5175/110 +
FLFS phase 2
FLFS Phase 2 Introduction
license NX
WHITE
LABEL
Introduction
CRE_1509
Introduction
NX2008
Introduction
RAID on
NX2008
Introduction
NX 8000
4)
Introduction
NX 2008 on
HP DC7800
DIGITIZER
CR 30-X Tpye 5175/100
Digitizer Type 5175/110
Digitizer Model Files
Speedclass free,
CR30SCF.XML V2.1.0.0
Speedclass operation,
CR30.XML V2.1.0.0
4)
Speedclass free,
CR30SCF.XML V2.2.0.0
4)
Speedclass operation,
CR30.XML V2.2.0.0
Workstation
NX 1.0 (SP1)
NX 1.0 (SP1 SU2)
NX 2.0
NX 2.0 (SU1)
NX 2.0 (SU2)
NX 2008 (DELL
Workstation)
NX 2008 (Laptop)
NX 2008 (HP 7800 )
NX 8000
NX 8200
NX 8300