AGFA CR 30-X - Page 77

DD+DIS125.08E
Functional Description
Software / Hardware Compatibility Char
t
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5 CR 30-X Chapter 2 / 3
01-2011 Type 5175/100/105/110/120/125 Agfa Company Confidential
1 Software / Hardware Compatibility Chart CR 30-X System
The Software / Hardware Compatibility Chart CR 30-X System:
 Provides an overview of all released CR 30-X System components, like
o software
o hardware
o supported applications
within a defined CR 30-X System.
 Indicates which CR 30-X System components are released for the respective
CR 30-X System Versions.
 Indicates the changes from one CR 30-X System version to another.
 Supports when a system is planned to be upgraded. The required system
components can be analyzed and identified based on the chart.
NOTE:
 The CR 30-X System version contains a continuous number which is increased
when one of the delivered system components changes.
 Explanation of symbols in tables next pages:
= compatible
= not compatible
The Software / Hardware Compatibility Chart is split-up in following two sections:
 For digitizer software ≤ CRE_1509 see section 1.1.
 For
digitizer software ≥ CRE_1511 see section 1.2.