Alcatel-Lucent 7210 SAS M - Page 358

VPLS Services Command Reference
Page 358 7210 SAS M Services Guide
VPLS Service Configuration Commands
Global Commands
config
—service
— vpls service-id [customer customer-id] [create (for 7210 SAS-M in Network mode)
— vpls service-id [customer customer-id] [create] [ vpn vpn-id] [m-vpls] <service-id> [svc-sap-
type {null-star|dot1q-preserve|any}] [customer-vid <vlan-id>] (for 7210 SAS-M in Access
uplink mode)
—no vpls service-id
— bgp
— pw-template-binding policy-id [split-horizon-group group-name]
[import-rt {ext-community...(up to 5 max)}]
—no pw-template-binding policy-id
— route-distinguisher [ip-addr:comm-val | as-number:ext-comm-val]
—no route-distinguisher
— route-target {ext-community | {[export ext-community] [import ext-
community]}}
—no route-target
— vsi-export policy-name [policy-name...(up to 5 max)]
—no vsi-export
— vsi-import policy-name [policy-name...(up to 5 max)]
—no vsi-import
—[no] bgp-ad
—[no] shutdown
— vpls-id vpls-id
— vsi-id
— prefix low-order-vsi-id
—no prefix
— description description-string
—no description
— [no
] disable-aging
— [no] disable-learning
— [no] discard-unknown
— endpoint endpoint-name [create]
—no endpoint
— block-on-mesh-failure
— [no] block-on-mesh-failure
— description description-string
—no description
— [no] ignore-standby-signaling
— [no] mac-pinning
— max-nbr-mac-addr table-size
—no max-nbr-mac-addr
— revert-time revert-time | infinite
—no revert-time
— static-mac ieee-address [create]
—no static-mac
— [no] suppress-standby-signaling
— eth-cfm
—[no] mep mep-id domain md-index association ma-index [direction
{up|down}]
— [no] mep mep-id domain md-index association
ma-index
— [no] ccm-enable