Argo Service Manual Brake/Steering System
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
BR-5A
ST-17
9. Apply some axle grease to the length of the Steering Shaft, Photo ST-17, and insert
it from the bottom up, into the Steering Column Assembly with the small keyway
facing towards you. Photo ST-18
ST-18
ST-15 ST-16
On Vehicles manufactured from C22453, R22452, B14700, A14743, N14708:
i. Re-attach the 612-117 Steering Column
Frame Assembly to the transmission.
Secure with (2) 103-55 fasteners and (2)
108-24 Washers at the front 2 locations,
and (1) 112-132 (longer) fastener and
(1) 108-24 Washer at the rear location.
Photo ST-18A
IMPORTANT
Remember to reinstall the 108-08 Flat Washers between the steering column frame
assembly plate and transmission mounting bosses. Refer to your illustrated parts
manual to review their location if necessary.
ST-18A
To Next Page
Loading...
