Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
Argo Service Manual Transmission
TR-29
7. Orient the Sun Gear as in Photo TR-78 with the higher shoulder side facing up.
Install it to the splined end of the Output Shaft. Photo TR-79 & 80
8. Secure the Sun Gear with a Snap Ring. Photo TR-81
9. Be sure the Retaining Ring is properly seated to the machined groove of the Output
Shaft. Photo TR-82 Press the Output Shaft from the inside of the cage to seat the
Retaining Ring snuggly against the Sun Gear. Photo TR-83
TR-78
TR-79
TR-80 TR-81
TR-83TR-82
To Next Page
Loading...
