Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
Argo Service Manual Transmission
TR-37
28. Install a Retaining Ring to the inner groove of the Housing’s Output Shaft side.
Photo TR-123 & 124
29. Install a Retaining Ring into the Housing at the shifter assemblies bearing side.
Photo TR-125 & 126
30. Apply 592 LOCTITE Teflon pipe sealant to the Magnetic Oil Drain Plug and install
it into the housing. Tighten only snug into Housing. Photo TR-127 & 128
TR-121 TR-122
TR-123
TR-124
TR-125
TR-126
To Next Page
Loading...
