Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
Argo Service Manual Transmission
TR-47
57. Secure the Cover using (1) Cap Screw, (4) Bolts and (4) Lock Washers. Apply
LOCTITE Silver Grade anti-seize to the cap screw before installing to the lower end
of the transmission assembly. Photo TR-174 & 175
TR-174
TR-175
Apply a little gear oil to the inner lip of the
Oil Seal to ease assembly around the Output
Shaft and prevent any deformity during
installation. Photo TR-178
58. Secure the Cover and torque to specifications. Photo TR-176 & 177
TR-176
TR-177
TR-178
Tighten down all fasteners in a cross corner sequence.
To Next Page
Loading...
