Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
Transmission Argo Service Manual
TR-48
59. Press the inner Oil Seal to the Output Shaft. Seat it to the Retaining Ring that was
previously installed in the Housing in step 29. Do not over press. Photo TR-179,
180 & 181
60. Install a Retaining Ring to the top of the Oil Seal. Photo TR-182 & 183
TR-179
TR-180
TR-181 TR-182
TR-183
To Next Page
Loading...
