Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
Argo Service Manual Transmission
TR-53
74. Install the Oil Seal to the Input Shaft
using a soft faced mallet and seal instal-
lation tool. Photo TR-207, 208 & 209
TR-206 TR-207
TR-208 TR-209
75. Apply 680 Green LOCTITE to the
plug plate sealing edge and tap it into
the Housing using a steel hammer.
Photo TR-210, 211 & 212
TR-210
TR-211
See Transmission Component Changes chart
on page TR-26 regarding plug plates and side
covers.
To Next Page
Loading...
