Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
TR-23A
Argo Service Manual Transmission
TR-91
TR-93
TR-92
TR-94
Transmissions Manufactured From Serial Number A3784, require a 113-16
O-Ring installed to the machined groove located near the end of the reverse shift
shaft and require these extra steps to install it.
i Continue to push the reverse shift shaft through the housing until the machined
groove for the O-ring location is visible to the outside of the housing. Photo TR94A
ii Install the 113-16 O-ring to the groove and apply some oil lubrication. Photo TR94B
IMPORIMPOR
IMPORIMPOR
IMPOR
TT
TT
T
ANTANT
ANTANT
ANT
TR-94A
TR-94B
To Next Page
Loading...
