Argo S - Page 429

Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
TR-31A
Argo Service Manual Transmission
TR-130
TR-131
35. Install the 102-05 Oil Seal to the Input Shaft. Photo TR-131 & 132
36. Install the 102-03 Oil Seal to the Output Shaft. Seat below the Retaining Ring groove.
Photo TR-133 & 134
37. Seat a 106-03 Retaining ring to the machined groove just above the previously in-
stalled Oil Seal.
Photo TR-135
TR-133
TR-135
TR-132
TR-134