Performance Monitor Unit
ARM DDI 0500D Copyright © 2013-2014 ARM. All rights reserved. 12-9
ID021414 Non-Confidential
The PMCR_EL0 can be accessed through the internal memory-mapped interface and the
external debug interface, offset
0xE04
.
12.4.2 Performance Monitors Common Event Identification Register 0
The PMCEID0_EL0 characteristics are:
Purpose Defines which common architectural and common microarchitectural
feature events are implemented.
Usage constraints This register is accessible as follows:
This register is accessible at EL0 when PMUSERENR_EL0.EN is set to 1.
Configurations The PMCEID0_EL0 is architecturally mapped to:
• The AArch32 register PMCEID0. See Performance Monitors
Common Event Identification Register 0 on page 12-18.
• The external register PMCEID0_EL0.
Attributes PMCEID0_EL0 is a 32-bit register.
Figure 12-3 shows the PMCEID0_EL0 bit assignments.
Figure 12-3 PMCEID0_EL0 bit assignments
Table 12-6 on page 12-10 shows the PMCEID0_EL0 bit assignments
EL0
EL1
(NS)
EL1
(S)
EL2
EL3
(SCR.NS = 1)
EL3
(SCR.NS = 0)
Config RO RO RO RO RO
Table 12-5 PMCEID0_EL0 bit assignments
Bits Name Function
[31:0] CE[31:0] Common architectural and microarchitectural feature events that can be counted by the PMU event counters.
For each bit described in Table 12-6 on page 12-10, the event is implemented if the bit is set to 1, or not
implemented if the bit is set to 0.
To Next Page
Loading...
