Excluded MIBs
Snmp Response Pdu Source-IP Information
Selection Policy : dstIpOfRequest
1
Trap Pdu Source-IP Information
Selection Policy : Configured IP
1
dstIpOfRequest: The destination IP address of the interface on which an SNMP request is received i s used as
the source IP address in SNMP replies.
Viewing SNMP notification configuration (CLI)
Syntax:
show snmp-server
Displays the currently configured notification settings for versions SNMPv1 and SNMPv2c traps, including SNMP
communities, trap receivers, link-change traps, and network security notifications.
Example:
In the following Example:, the show snmp-server command output shows that the switch has been configured
to send SNMP traps and notifications to management stations that belong to the "public," "red-team," and "blue-
team" communities.
Figure 32: Display of SNMP notification configuration
Advanced management: RMON
The switch supports RMON (remote monitoring) on all connected network segments. This allows for
troubleshooting and optimizing your network.
The following RMON groups are supported:
166 Aruba 2530 Management and Configuration Guide for
ArubaOS-Switch 16.05
To Next Page
Loading...
