PortId : 08 00 0f 14 de f2
SysName : HP Switch
System Descr : HP Switch, revision xx.15.06.0000x
PortDescr : LAN Port
System Capabilities Supported : bridge, telephone
System Capabilities Enabled : bridge, telephone
Remote Management Address
MED Information Detail
1
EndpointClass :Class3
Media Policy Vlan id :10
Media Policy Priority :7
Media Policy Dscp :44
Media Policy Tagged :False
Poe Device Type :PD
Power Requested :47
Power Source :Unknown
Power Priority :High
1
Indicates the policy configured on the telephone. A configuration mismatch occurs if the supporting port is
configured differently.
Displaying LLDP statistics
LLDP statistics are available on both a global and a per-port levels. Rebooting the switch resets the LLDP
statistics counters to zero. Disabling the transmit and/or receive capability on a port "freezes" the related port
counters at their current values.
Viewing LLDP statistics
For more information, see Displaying LLDP statistics on page 199.
Syntax:
show lldp stats [port-list]
The global LLDP statistics command displays an overview of neighbor detection activity on the switch, plus data
on the number of frames sent, received, and discarded per-port.
The per-port LLDP statistics command enhances the list of per-port statistics provided by the global statistics
command with some additional per-port LLDP statistics.
Global LLDP Counters:
Neighbor Entries List Last
Updated
The elapsed time since a neighbor was last added or deleted.
New Neighbor Entries Count
The total of new LLDP neighbors detected since the last switch reboot.
Disconnecting, and then reconnecting a neighbor increments this
counter.
Table Continued
Chapter 8 Configuring for Network Management Applications 199
To Next Page
Loading...
