Action
Clear the CPPM Cache Timeout of the Endpoint Repository.
Unable to configure a URL hash key
Symptom
The following message is displayed:
Key exceeds the maximum length of 64 characters.
Cause
The URL hash key is not valid.
Action
Select a key that is 64 or less ASCII text. For example:
switch(config)# aaa authentication captive-portal url-hash-key plaintext
“8011A89FEAE0234BCCA”
authentication command
Use the following authentication commands to configure ClearPass Captive Portal.
Command Description
aaa authentication captive-portal enable
Enables redirection to a Captive Portal server for
additional client authentication.
aaa authentication captive-portal
disable
or
no aaa authentication captive-portal
enable
Disables redirection to a Captive Portal server for
additional client authentication.
aaa authentication captive-portal url-
hash-key
Configures a hash key used to verify the integrity of the
portal URL.
show command
Use the following show commands to view the various configurations and certificates.
Command Description
show running-config
Shows the running configuration.
show config
Shows the saved configuration.
show ip
Shows the switch IP addresses.
Table Continued
Chapter 9 Captive Portal for ClearPass 219
To Next Page