EasyManua.ls Logo

Aruba 2530 - LLDP-MED Endpoint Device Classes; LLDP-MED Endpoint Support; LLDP-MED Operational Support

Aruba 2530
479 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LLDP-MED endpoint support
LLDP-MED interoperates with directly connected IP telephony (endpoint) clients having these features and
services:
• Autonegotiate speed and duplex configuration with the switch
• Use the following network policy elements configured on the client port
◦ Voice VLAN ID
◦ 802.1p (Layer 2) QoS
◦ Diffserv codepoint (DSCP) (Layer 3) QoS
• Discover and advertise device location data learned from the switch
• Support ECS (such as E911, 999, and 112)
• Advertise device information for the device data inventory collected by the switch, including:
◦ Hardware revision
◦ Firmware revision
◦ Software revision
◦ Serial number
◦ Manufacturer name
◦ Model name
Asset ID
• Provide information on network connectivity capabilities (For example, a multi-port VoIP phone with Layer 2
switch capability)
• Support the fast-start capability
NOTE:
LLDP-MED is intended for use with VoIP endpoints and is not designed to support links between
network infrastructure devices, such as switch-to-switch or switch-to-router links.
LLDP-MED endpoint device classes
LLDP-MED endpoint devices are, by definition, located at the network edge and communicate using the LLDP-
MED framework. Any LLDP-MED endpoint device belongs to one of the following three classes:
• Class 1 (generic endpoint devices): These devices offer the basic LLDP discovery services, network policy
advertisement (VLAN ID, Layer 2/802.1p priority, and Layer 3/DSCP priority), and PoE management. This
class includes such devices as IP call controllers and communication-related servers.
• Class 2 (media endpoint devices): These devices offer all Class 1 features plus media-streaming capability,
and include such devices as voice/media gateways, conference bridges, and media servers.
• Class 3 (communication devices): These devices are typically IP phones or end-user devices that otherwise
support IP media and offer all Class 1 and Class 2 features, plus location identification and emergency 911
capability, Layer 2 switch support, and device information management.
LLDP-MED operational support
The switches offer two configurable TLVs supporting MED-specific capabilities:
188 Aruba 2530 Management and Configuration Guide for
ArubaOS-Switch 16.05

Table of Contents