Aruba 2530 - Amp-Server

switch(config)# amp-server ip 192.168.1.1 group "group" folder "folder" secret "branch1024"
The show amp-server command shows the configuration details:
AirWave Configuration details
AMP Server IP : 192.168.1.1
AMP Server Group : GROUP
AMP Server Folder : folder
AMP Server Secret : branch1024
AMP Server Config Status: Configured
amp-server
Syntax
[no] amp-server ip <IP ADDRESS> group <GROUP> folder <FOLDER> secret <SECRET>
Description
The amp-server command configures the AirWave Management Platform (AMP) IP address, group, folder, and
shared secret and triggers the device registration with AMP.
IMPORTANT: Only the manager role can execute this command.
Parameters and options
ip
AMP server IP address.
group
AMP server group name.
folder
AMP server folder name.
secret
AMP server shared secret string.
no
The no amp-server command removes the configuration for the AMP server.
show amp-server
To view the AirWave configuration details, use the show amp-server command, for example:
AirWave Configuration details
AMP Server IP : 192.168.1.1
AMP Server Group : HP_GROUP
AMP Server Folder : folder
AMP Server Secret : branch1024
AMP Server Config Status: Configured
236 Aruba 2530 Management and Configuration Guide for
ArubaOS-Switch 16.05