Aruba 2530 - Show Ntp Statistics; Show Ntp Status

- 'ntpEntNotifSyspeerChanged' The notification to be sent when a (new) syspeer has
been selected.
- 'ntpEntNotifAddAssociation' The notification to be sent when a new association is
mobilized.
- 'ntpEntNotifRemoveAssociation' The notification to be sent when an association is
demobilized.
- 'ntpEntNotifConfigChanged' The notification to be sent when the NTP configuration
has changed.
- 'ntpEntNotifLeapSecondAnnounced' The notification to be sent when a leap second
has been announced.
- 'ntpEntNotifHeartbeat' The notification to be sent periodically (as defined by
ntpEntHeartbeatInterval) to indicate that the NTP entity is still alive.
- 'ntpEntNotifAll' The notification to be sent when all traps have been enabled
show ntp statistics
This command is used to show NTP statistics.
Syntax
show ntp statistics
Description
Show information about NTP packets.
Examples
Switch(config)# show ntp statistics
NTP Global statistics information
NTP In Packets : 100
NTP Out Packets : 110
NTP Bad Version Packets : 4
NTP Protocol Error Packets : 0
switch(config)# show ntp statistics
NTP Global statistics information
NTP In Packets : 100
NTP Out Packets : 110
NTP Bad Version Packets : 4
NTP Protocol Error Packets : 0
show ntp status
Syntax
Description
Show the status of NTP.
show ntp status
48 Aruba 2530 Management and Configuration Guide for
ArubaOS-Switch 16.05