Action
No action is required.
Show commands
Use the following show commands to view the various configurations and status.
Command Description
show device-profile
Shows the device profile configuration and status.
show device-profile config
Shows the device profile configuration details for a
single profile or all profiles.
show device-profile status
Shows currently applied device profiles.
show rogue-ap-isolation
Shows the following information:
• The status of the feature: enabled or disabled.
• The current action type for the rogue MACs
detected.
• The list of MAC addresses detected as rogue and
the MAC address of the AP that reported them.
show rogue-ap-isolation whitelist
Shows the rogue AP whitelist configuration.
show run
Shows the running configuration.
Validation Rules
Validation Error/Warning/Prompt
device-profile profile-name default-ap-
profile
Maximum tagged VLANs that can be associated with a
device-profile is 256.
device-profile profile-name creation. String too long. Allowed length is 32 characters.
device-profile profile-name creation. Device profile <> already exists.
device-profile profile-name creation. The maximum number of device profiles allowed is 5.
device-profile profile-name deletion. Device profile <> does not exist.
device-profile profile-name deletion. Cannot delete profile <> when associated with a device
type.
device-profile profile-name deletion. Default profile cannot be deleted.
Table Continued
Chapter 11 Auto configuration upon Aruba AP detection 253
To Next Page
Loading...
