Aruba 2530 - Configuring Ports (Menu)

Table 5: Protocols and modes supported for fiber optic ports
100 Mbps Gigabit 10 Gigabit
Protocols
100BASE-FX
100BASE-BX10
1000BASE-SX
1000BASE-LX
1000BASE-BX
101000BASE-LH
10GBASE-SR
10GBASE-LR
10GBASE-LRM
Modes
100HDx
100FDx
Auto1000FDx Auto
Configuring ports (Menu)
The menu interface uses the same screen for configuring both individual ports and port trunk groups. For
information on port trunk groups, see the chapter on "Port Trunking".
Procedure
1. From the Main Menu, select:
2. Switch Configuration…
2. Port/Trunk Settings
Port/trunk settings with a trunk group configured
=====================- TELNET - MANAGER MODE -=====================
Switch Configuration - Port/Trunk Settings
Port Type Enabled Mode Flow Ctrl Group Type
---- -------- + -------- ----------- --------- ----- -----
A1 1000T | Yes Auto-10-100 Disable
A2 1000T | Yes Auto-10-100 Disable
A3 1000T | Yes Auto Disable
A3 1000T | Yes Auto Disable
A4 1000T | Yes Auto Disable
A5 1000T | Yes Auto Disable
A6 1000T | Yes Auto Disable
A7 1000T | Yes Auto Disable Trk1 Trunk
A8 1000T | Yes Auto Disable Trk2 Trunk
Actions-> Cancel Edit Save Help
Cancel changes and return to previous screen.
Use arrow keys to change action selection and <Enter> to execute
action.
2. Press [E] (for Edit).
The cursor moves to the Enabled field for the first port.
For further information on configuration options for these features, see the online help provided with this
screen.
3. When you have finished making changes to the above parameters, press [Enter], then press [S] (for
Save).
58 Aruba 2530 Management and Configuration Guide for
ArubaOS-Switch 16.05