Aruba 2530 - Page 334

System module Description Documented in HPE Switch
hardware/software guide
ip IP addressing: Configures the
switch with an IP address and
subnet mask to communicate on the
network and support remote
management access; configures
multiple IP addresses on a VLAN;
enables IP routing on the switch.
Management and Configuration
Guide
iplock IP Lockdown: Prevents IP source
address spoofing on a per-port and
per-VLAN basis by forwarding only
the IP packets in VLAN traffic that
contain a known source IP address
and MAC address binding for the
port.
Access Security Guide
ipx Novell Netware protocol filtering: On
the basis of protocol type, the
switch can forward or drop traffic to
a specific set of destination ports on
the switch.
Access Security Guide
lacp LACP trunks: The switch can either
automatically establish an 802.3ad-
compliant trunk group or provide a
manually configured, static LACP
trunk.
Management and Configuration
Guide
ldbal Load balancing in LACP port trunks
or 802.1s Multiple Spanning Tree
protocol (MSTP) that uses VLANs in
a network to improve network
resource utilization and maintain a
loop-free environment.Load-
balancing messages also include
switch meshing events. The switch
meshing feature provides redundant
links, improved bandwidth use, and
support for different port types and
speeds.
Management and Configuration
Guide
Advanced Traffic Management
Guide
lldp Link-Layer Discovery Protocol:
Supports transmitting LLDP packets
to neighbor devices and reading
LLDP packets received from
neighbor devices, enabling a switch
to advertise itself to adjacent
devices and to learn about adjacent
LLDP devices.
Management and Configuration
Guide
Table Continued
334 Aruba 2530 Management and Configuration Guide for
ArubaOS-Switch 16.05