Aruba 2530 - Page 422

A2 30 35 7 9
A3 120 420 670 670
Enable/Disable debug tracing for MOCANA code
Debug security
Syntax
debug security ssl
Description
Enables the debug tracing for MOCANA code.
Use the [no] parameter to disable debug tracing.
ssl
Display all SSL messages.
User diagnostic crash via Front Panel Security (FPS)
button
Allows the switch’s front panel Clear button to manually initiate a diagnostic reset. In the case of an application
hang, this feature allows you to perform reliable diagnostics by debugging via the front panel Clear button.
Diagnostic reset is controlled via Front Panel Security (FPS) options.
Front panel security password-clear
From the configure context:
Syntax
[no] front-panel-security password-clear <RESET-ON-CLEAR> | factory-reset |
password-recovery | diagnostic-reset <CLEAR-BUTTON | SERIAL-CONSOLE>
Description
Enable the ability to clear the password(s) and/or configuration via the front panel buttons.
[no] disables the password clear option.
Parameters
• If password-clear is disabled, the password(s) cannot be reset using the clear button on the front panel of
the device.
• If factory-reset is disabled, the configuration/password(s) can not be reset using the clear and reset
button combination at boot time.
• When password-recovery is enabled (and the front panel buttons disabled), a lost password can be
recovered by contacting HPE customer support.
• When password-recovery is disabled, there is no way to access a device after losing a password with the
front panel buttons disabled.
422 Aruba 2530 Management and Configuration Guide for
ArubaOS-Switch 16.05