Aruba 2530 - Page 433

Usage
rogue-ap-isolation [enable | disable]
rogue-ap-isolation action [log | block]
[no] rogue-ap-isolation whitelist <MAC-ADDRESS>
VXLAN show commands
VXLAN show commands include commands to display the status of a VXLAN feature, tunnels, and tunnel
statistics.
show device-profile
Syntax
Within the configure context:
show device-profile
Description
Show device profile configuration and status.
config
Show the device profile configuration details for a single, or all, profiles.
status
Show currently applied device profiles.
Usage
show device-profile config <PROFILE-NAME>
show device-profile status
show device-profile config
Switch# Show device-profile config
Device Profile Configuration
Configuration for device profile : default-ap-profile
untagged-vlan : 1
tagged-vlan : None
ingress-bandwith : 100%
egress-bandwith : 100%
cos : 0
speed-duplex : auto
poe-max-power : 33W
poe-priority : High
allow-jumbo-frames: Enabled
Configuration for device profile : profile1
untagged-vlan : 10
tagged-vlan : 40,50,60
ingress-bandwith : 10%
egress-bandwith : 95%
cos : 4
speed-duplex : auto-10
Chapter 22 Easing Wired/Wireless Deployment feature integration 433