Validation Error/Message/Prompt
A profile name that is too long produces an error:
switch# aaa authentication captive-
portal-
profiletest342...;ldklsdjflkdsjflk
The name must be fewer than 64 characters.
When attempting to configure more than the number of
admin configured profiles,switch# aaa
authentication captive-portal-profile
profileNumber2
No more captive portal profiles may be created.
Policy commands
Overview
These commands create a context that may be used to classify the policy. From the existing policy command, a
new policy type called user was added. The new actions are specific to policy user:
• redirect
• permit
• deny
NOTE:
Only L3 classes (IPv4 and IPv6) are currently supported.
The user policy includes “implicit deny all rules” for both IPv4 and IPv6 traffic.
policy user
Syntax
policy user <POLICY-NAME>
Description
Create and enter newly created user policy context.
Usage
Switch (config)# policy user employee
[no] policy user
Syntax
[no] policy user <POLICYNAME>
Description
Delete and remove specified user policy from switch configuration.
Operating notes
440 Aruba 2530 Management and Configuration Guide for
ArubaOS-Switch 16.05
To Next Page
Loading...
