Aruba 2530 - Page 445

Options
<VALUE>
Valid values are 0 – 999,999,999; a required configuration in user roles and it defaults to 0.
(user-role)# reauth-period 100
Set the reauthentication value for the current user role:
(user-role)# reauth-period 100
(user-role)# reauth-period 0
0 is used to disable reauthentication, and it is the default value.
(user-role)# reauth-period 0
Validation rules
Validation Error/Warning/Prompt
(user-role)# reauth-period 10000000
Invalid input: 100000000000000000
VLAN commands
NOTE: The VLAN must be configured on the switch at the time the user role is applied. Only one of
VLAN-name or VLAN-ID is allowed for any user role.
Modification of the VLAN will force users assigned to that VLAN via a user role to be
deauthenticated.
vlan-id
From within the user-role context:
Subcommand syntax
vlan-id <VLAN-ID>
Description
Create a VLAN with id VLAN-ID.
Use the [no] version of the command when clearing the VLAN-ID from the user role:
Usage
(user-role)# no vlan-id
vlan-name
From within the user-role context:
Subcommand syntax
vlan-name <VLAN-NAME>
Description
Create a VLAN with the name VLAN-NAME. Only one of VLAN-NAME or VLAN-ID is allowed for any user role.
Chapter 23 Local user roles 445