Aruba 2530 - Page 70

• description: This object provides information about broadcast storm control configuration of each port.
• index: {hpicfffbcaststormcontrolportindex}::= {hpicfFfBcastStormControlPortConfigTable 1}
hpicfFfBcastStormControlPortConfigEntry ::=
Syntax sequence:hpicfFfBcastStormControlPortIndex InterfaceIndex,
hpicfFfBcastStormControlMode Integer,
hpicfFfBcastStormControlRisingpercent Integer32,
hpicfFfBcastStormControlRisingpps Integer32,
hpicfFfBcastStormControlAction Integer,
hpicfFfBcastStormControlPortDisableTimer Unsigned32
hpicfFfBcastStormControlPortIndex OBJECT-TYPE
• Syntax: Interfaceindex
• max-access: not-accessible
• status: current
• description: The Index Value Which Uniquely Identifies A Row In The Interfaces Table.
::= {hpicfFfBcastStormControlPortConfigEntry 1}
hpicfFfBcastStormControlMode OBJECT-TYPE
• Syntax Integer: disabled(1), Bcastrisinglevelpercent(2), Bcastrisinglevelpps(3)
• max-access: read-write
• status: current
• description: The broadcast storm control mode of a port. A value of disable (1) indicates that no rising
threshold value is set for broadcast storm traffic on this port. A value of bcastrisinglevelpercent (2) indicates
that the rising threshold rate for broadcast storm traffic is configured in percentage of port bandwidth. A value
of bcastrisinglevelpps (3) indicates that the rising threshold rate for broadcast storm traffic is configured in
packets per second.
• DEFVAL: disabled
::= {hpicfFfBcastStormControlPortConfigEntry 2}
hpicfFfBcastStormControlRisingpercent OBJECT-TYPE
• Syntax Integer32 (1..100)
• max-access: read-write
• status: current
• description: This Is The Rising Threshold Level in percent of bandwidth of the port.
hpicfFfBcastStormControlAction occurs when broadcast traffic reaches this level.
::= {hpicfFfBcastStormControlPortConfigEntry 3}
70 Aruba 2530 Management and Configuration Guide for
ArubaOS-Switch 16.05