Job Aids
Blueprints (floor plans) are an important tool when planning, designing, and installing
station wiring. The floor plans (Figure 1-4) provide a complete view of all conduit and other
cabling facilities placed during construction of the building. These facilities should be
considered when planning site or satellite locations and cabling.
Terminals
The number of information outlets to be installed per terminal location should be
determined by your requirements. It may also be advantageous to initially install any
additional information outlets that may be required for future growth or terminal
rearrangements.
To begin designing the station wiring, indicate the following information on the floor
plan(s):
● Location of each information outlet and associated terminal type if known (analog,
hybrid, or digital)
●
Any associated terminal adjuncts or modules and the required powering
arrangements.
1-8
To Next Page
Loading...
General