110-TYPE HARDWARE
110P-TYPE HARDWARE ORDERING INFORMATION
Description
110PB1-300CT Terminal Block
110PC1-300CT Terminal Block
110PB1-300FT Terminal Block
110PC1-300FT Terminal Block
110PE1-300CT Terminal Block
110PE1-300CT/FT Terminal Block
110PE1-300FT Terminal Block
110PB1-900CB Terminal Block
110PC1-900CB Terminal Block
110PB1-900CT Terminal Block
110PC1-900CT Terminal Block
110PB1-900FT Terminal Block
110PC1-900FT Terminal Block
110PE1-900CT/FT Terminal Block
110PE1-900FT Terminal Block
Comcode
103 823 886
103 804 852
103 804 829
103 804 860
104 017 066
104 173 166
103 823 902
104 173 158
104 166 590
103 804 837
103 048 878
103 804 845
103 804 886
104 173 174
103 823 910
188-Type Backboards
The 188-type backboards are wire troughs used to channel the patch cords or cross-
connecting wire between the wiring blocks. The backboards consist of a metal frame
equipped with retaining rings. The 188-type backboards are available in four types:
●
The 188B1 backboard is a horizontal wire trough used with 110A-type terminal
blocks.
●
The 188C2 backboard is a vertical wire trough used with 900-pair 110P-type terminal
blocks.
●
The 188D2 backboard is a vertical wire trough used with 300-pair 110P-type terminal
blocks.
● The 188E2 backboard is a horizontal wire trough that is used between the
Trunk/Auxiliary Field and the Distribution Field for either 300- or 900-pair 110P-
type terminal blocks.
3-15
To Next Page
Loading...