AT&T 75 - Figure 2-119 Connections for Pdms in Data Mounting-Through Cross-Connect Field

Z100-TYPE HARDWARE
Figure 2-119. Connections for PDMs in Data Mounting—Through Cross-Connect
Field
Connection to Individual PDMs Through Cross-Connect Field (Figure 2-120)
1.
2.
3.
4.
Determine port assignment of PDM from Data Module Form:
EXAMPLE: Port Number B
02
01
Carrier
Slot Circuit
Install PDM per instructions in PDM User's Guide (999-700-028IS).
Install patch cord at cross-connect field.
Administer per AT&T System 75 and System 75 XE Implementation and AT&T
System 75 and System 75 XE Administration.
2-170