66-TYPE HARDWARE
Figure 4-75. Connections for External Ringing or Queue Warning Indicator
AUXILIARY EQUIPMENT INSTALLATION
Auxiliary Equipment Description
The following equipment can be optionally provided with the system.
●
●
●
278A Adapters—Provides an interface, when required, to customer-provided
equipment for Loudspeaker Paging feature. The 278A adapter requires -24 volt dc
power. It can be modified for -48 volt dc power with a D-181321 kit of parts
(Comcode 103 031 181).
89A Control Unit—Can also be used to provide an interface, when required, to
customer-provided equipment for Loudspeaker paging feature. A 2012D transformer
provides -48 volt dc power to the 89A.
PagePac Paging System—Provides an amplifier system for Loudspeaker Paging
feature. Three models are available:
—
PagePac 20—Provides a single zone of paging with an input source for music.
The unit can also be modified to provide 9 or 39 paging zones.
—
PagePac VS—Provides one to three paging zones. It also permits all zone
paging. Two optional feature cards are available to provide music or talk-
back over paging.
—
PagePac 50/100/200—Provides 1 to 24 paging zones. Optional add-ons are
available to provide music or talk-back over paging. It is also possible to use
a customer-supplied music source.
All PagePac models require 115-volt ac power.
4-115
To Next Page
Loading...
General