Z100-TYPE HARDWARE
●
Processor Data Modules (PDMs)—Provide an interface to an Applications Processor
(AP), AUDIX, Call Management System (CMS), Distributed Communications System
(DCS), Property Management System, customer-provided terminals and computers,
and Station Message Detailed Recording (SMDR).
●
Asynchronous Data Units—Provide an interface between the system data line circuit
pack and the customer’s asynchronous data terminals and host computers. They also
can be used to provide an interface to a Property Management System or SMDR
equipment.
Installing Loudspeaker Paging and Music-on-Hold
Requirements
The Loudspeaker Paging feature provides a connection from the TN763 Auxiliary Trunk in
the system to a customer-provided paging amplifier. All attendants and voice terminal users
have access to the voice paging equipment.
The Music-on-Hold feature provides a connection from the TN763 Auxiliary trunk in the
system to a customer-provided music source. All calls on the system that are on hold,
waiting in a queue, or parked will receive music to let the waiting party know that the
connection is still in effect.
The music source that is used for the Music-on-Hold feature can also be connected through a
paging amplifier to provide background music over the loudspeakers.
Figure 2-98 is a block diagram that shows how the Loudspeaker Paging and Music-on-Hold
features interact. Detailed descriptions for installing these features are included in this
manual.
2-140
To Next Page
Loading...
General