AT&T 75 - 110-Type Patch Cords; Cords

110-TYPE HARDWARE
188-TYPE BACKBOARD ORDERING INFORMATION
Description Comcode
188B1 Backboard 102 895 569
188C2 Backboard 104 031 794
188D2 Backboard 104 032 404
188E2 Backboard 104 031 802
Cords
110-Type Patch Cords
The 3-pair patch cords (Figure 3-9) are used to cross-connect terminals to switch ports at the
Distribution Field. The patch cords are available in several lengths. One-pair patch cords
are also available. The patch cords are equipped with plastic plugs on both ends. The plastic
plugs are compatible with the 110-type connecting blocks used on the index strips. The patch
cords are keyed so that they cannot be inserted upside down or on a split pair.
110-TYPE PATCH CORD ORDERING INFORMATION
Cord
F-61679-2
F-61679-3
F-61679-4
F-61679-5
F-61679-6
F-61679-7
F-61679-8
F-61679-9
F-61679-19
110P6A2B
110P6A3B
110P6A4B
110P6A5B
110P6A6B
110P6A7B
110P6A8B
110P6A9B
110P6A19B
Description
1-Pair
1-Pair
1-Pair
1-Pair
1-Pair
1-Pair
1-Pair
1-Pair
1-Pair
3-Pair
3-Pair
3-Pair
3-Pair
3-Pair
3-Pair
3-Pair
3-Pair
3-Pair
Length
2 ft (0.6 m)
3 ft (0.9 m)
4 ft (1.2 m)
5 ft (1.5 m)
6 ft (1.8 m)
7 ft (2.1 m)
8 ft (2.4 m)
9 ft (2.7 m)
19 ft (5.8 m)
2 ft (0.6 m)
3 ft (0.9 m)
4 ft (1.2 m)
5 ft (1.5 m)
6 ft (1.8 m)
7 ft (2.1 m)
8 ft (2.4 m)
9 ft (2.7 m)
19 ft (5.8 m)
Comcode
(1 per package)
103 991 873
103 991 881
103 991 899
103 991 907
103 991 915
103 991 923
103 991 931
103 991 949
103 991 956
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Comcode
(10 per package)
Not Available
Not Available
Not Available
104 073 606
Not Available
Not Available
Not Available
104 073 614
104 073 622
103 882 965
103 882 957
103 882 940
103 882 973
103 882 932
103 882 924
103 882 916
103 882 908
103 882 890
3-16