AT&T 75 - Figure 2-82 Connections for DS1 Tie Trunks between 2 System 75 S or System 75 Xes

Z100-TYPE HARDWARE
NOTE: FOR DISTANCES OVER 50 FEET (15.2 M)
USE C6E CONNECTOR CABLE(S) BETWEEN
C6D CONNECTOR CABLE AND DS1 TIE TRUNK
CIRCUIT PACK.
Figure 2-82. Connections for DS1 Tie Trunks Between 2 System 75s or System
75 XEs
NOTE:
FOR DISTANCES OVER 50 FEET (15.2 M)
USE C6E CONNECTOR CABLE(S) BETWEEN
C6C CONNECTOR CABLE AND DS1 TIE TRUNK
CIRCUIT PACK.
Figure 2-83. Connections for DS1 Tie Trunks Using 551 T1 CSU
2-115