Z100-TYPE HARDWARE
AUXILIARY EQUIPMENT INSTALLATION
Auxiliary Equipment Description
The following equipment can be optionally provided with the system.
●
●
●
●
●
●
●
278A Adapters—Provides an interface, when required, to customer-provided
equipment for Loudspeaker Paging feature. The 278A adapter requires -24 volt dc
power. It can be modified for -48 volt dc power with a D-181321 kit of parts
(Comcode 103 031 181).
89A Control Unit—Can also be used to provide an interface, when required, to
customer-provided equipment for Loudspeaker Paging feature. A 2012D transformer
provides -48 volt dc power to the 89A.
PagePac* Paging System—Provides an amplifier system for Loudspeaker Paging
feature. Three models are available:
—
PagePac 20—Provides a single zone of paging with an input source for music.
The unit can also be modified to provide 9 or 39 paging zones.
—
PagePac VS—Provides one to three paging zones. It also permits all zone
paging. Two optional feature cards are available to provide music or talk-
back over paging.
—
PagePac 50/100/200—Provides 1 to 24 paging zones. Optional add-ons are
available to provide music or talk-back over paging. It is also possible to use
a customer-supplied music source.
All PagePac models require 115-volt ac power.
36A Voice Couplers—Provides an interface and system protection for customer-
provided equipment for Intercept Treatment—Recorded Announcement, Music-on-
Hold, and Recorded Telephone Dictation Access features. The 36A voice coupler is
powered by a 2012D power transformer (set at -15 dBm). The 36A voice coupler can
also be wall-mounted.
Cook Electric Model NT7M00AA† or NT7M25AA† Digital Announcer—Provides
recorded announcements for Recorded Announcement feature. Model NT7M00AA
provides one channel of voice. Model NT7M25AA provides four channels of voice.
Both models require an ac adapter for 115-volt ac power.
Audichron* H9040 Wake-Up Announcement System—Provides automatic wake-up
announcements for use with the hospitality features. This unit requires a power unit
to be supplied locally that is rated at -48v dc at 1.2 amps.
3270 Data Modules—Provide a family of protocol converters that allow 3270-type
terminals to communicate with a host computer through the system.
* Registered trademark of Harris Corporation, Dracon Division
† Refer to the Cook Electric Digital Announcers product description and ordering information for complete
ordering codes.
* Registered trademark of Audichron Company
2-139