Z100-TYPE HARDWARE
Z113A Housing
The Z113A housing is used between the wall and equipment cabinets (Switch, Applications
Processor, Auxiliary, etc.). It consists of a Z8A1 base, two Z814A covers, and 25 Z6A
retainers.
Z114A Housing
The Z114A housing is designed to be used adjacent to the Z113A housing if no equipment
cabinet exists at the position or if the cabinet(s) is positioned against the wall with the
cross-connect field beside the cabinets(s). It consists of a Z8A1 base, one Z814A cover, one
Z815A cover, and 25 Z6A retainers.
CABLE SLACK MANAGER ORDERING INFORMATION
Description
Z113A Housing
Z114A Housing
Z8A1 Base
Z814A Cover
Z815A Cover
Z6A Retainer
Comcode
103 961 322
103 961 330
103 965 133
103 965 141
103 965 158
103 965 166
2-13
To Next Page
Loading...