AT&T 75 - Bulk Power Supply

110-TYPE HARDWARE
Note: A 543A power unit (Comcode 104 034 541) may be required for inrush protection
for a 20-amp 120-volt ac line serving multiple 329A Power Units. Contact your PSC for
details. Most multiple powering requirements should be served by the 346 modular
bulk power supply.
NOTES:
1.
THE 329A AND THE KS-22911, L1
ARE SIMILAR IN APPEARANCE.
2.
THE 2012D TRANSFORMER AND 248B
TRANSFORMER MUST BE ORDERED
SEPARATELY AND FIELD ASSEMBLED
AS SHOWN.
Figure 3-15. Individual Power Supplies
NOTE: THIS AC POWER STRIP MUST BE
LOCALLY PROVIDED.
Figure 3-16. AC Power Strip
3-29