66-TYPE HARDWARE
Cable Installation
Labeling
The port label shown in Figure 4-20 is installed on both ends of the 25-pair switch cables
that connect to the Trunk/Auxiliary Field and the Distribution Field. The blue/yellow
building and floor labels are optionally used for cables that connect from the equipment
room to a site or satellite located on another floor or in another building. An additional
yellow label is shown. This yellow label is used for auxiliary circuits that connect to the
Trunk/Auxiliary Field or SSI circuits that connect to an Applications Processor.
The blue/yellow label is used on 25-pair station cables that connect to site or satellite
closets.
Figure 4-20. Equipment Room Cabling Labels
CABLE/JACK/BUILDING LABEL ORDERING INFORMATION
Description
Qty. Per. Code
Comcode
201A Labels 34 Sheets
103 969 994
4-42
To Next Page
Loading...