AT&T 75 - Figure 2-124 SMDR Cabling for On-Premises Data Communications Equipment

Z100-TYPE HARDWARE
Figure 2-124 shows the cabling required to connect the 94A LSU, a printer, or customer-
provided data communications equipment (DCE). The M25B cable connects to the C1
connector on the 94A LSU.
Figure 2-124. SMDR Cabling for On-Premises Data Communications Equipment
Figure 2-125 shows the cabling required to connect a remote host connected by a private line.
Figure 2-125. SMDR Cabling for a Remote Host
2-177