AT&T 75 - Bulk Power Supply; Figure 2-17 Individual Power Supplies

Z100-TYPE HARDWARE
sized power supplies. The outlets on the ac power strip must be spaced 3.5 inches (8.89 cm)
to 4 inches (10.16 cm) apart with the plug inserts perpendicular to the strip.
Note: A 543A power unit (Comcode 104 034 541) may be required for inrush protection
for a 20 amp 120-volt ac line serving multiple 329A Power Units. Contact your PSC for
details. Most multiple powering requirements should be served by the 346 modular
bulk power supply.
NOTES:
1.
THE 329A AND THE KS-22911, L1
ARE SIMILAR IN APPEARANCE.
2.
THE 2012D TRANSFORMER AND 248B
TRANSFORMER MUST BE ORDERED
SEPARATELY AND FIELD ASSEMBLED
AS SHOWN.
Figure 2-17. Individual Power Supplies
NOTE: THIS AC POWER STRIP MUST BE
LOCALLY PROVIDED.
Figure 2-18. AC Power Strip
2-25