AT&T 75 - Figure 2-30 4-Pair Station Appearance Labels

Z100-TYPE HARDWARE
4-PAIR STATION LABELS—BLUE
The labels shown in Figure 2-30 identify 4-pair station appearances at the cross-connect
field. These labels should be installed in sequence (1 to 480) starting with the first connector
module installed. These numbers are used throughout the station wiring and at the
information outlets.
●
USAGE:
IDENTIFIES 4-PAIR STATION
APPEARANCES. LABELS ARE
NUMBERED IN SEQUENCE
FROM 1-480. THERE ARE 80
DIFFERENT 4-PAIR STATION
LABELS.
●
●
CODE NO:
101A THRU 105A,
115A
●
BLUE
Figure 2-30. 4-Pair Station Appearance Labels
USAGE:
CUSTOM IDENTIFICATION
OF 4-PAIR STATIONS AND
FOR SPARES.
CODE NO:
108A
BLUE
2-44