Z100-TYPE HARDWARE
Figure 2-3 shows the connector module support and jack panel. The support has tabs that
allow adjacent connector modules to snap and interlock together to form cross-connect fields.
An additional support is required for each cross-connect filed to provide a patch cord guide
for the last connector module in the field.
Figure 2-3. Z100-Type Support and Panel
The connecting units and Z5A retainers are located inside the jack panel. The Z5A retainers
located at the back of the jack panel snap closed to lock the mating connectors of the 25-pair
cables in place.
2-3
To Next Page
Loading...