66-TYPE HARDWARE
the cables from protruding above the top of the base. The cable slack managers are coded as
housings and are available as follows.
Z113A Housing
The Z113A housing is used between the wall and equipment cabinets (Switch, Applications
Processor, Auxiliary, etc.). It consists of a Z8A1 base, 2 Z814A covers, and 25 Z6A retainers.
Z114A Housing
The Z114A housing is designed to be used adjacent to the Z113A housing if no equipment
cabinet exists at the position or if the cabinet(s) is positioned against the wall with the
cross-connect field beside the cabinet(s). It consists of a Z8A1 base, 1 Z814A cover, 1 Z815A
cover, and 25 Z6A retainers.
CABLE SLACK MANAGER ORDERING INFORMATION
Description
Comcode
Z113A Housing
103 961 322
Z114A Housing 103 961 330
Z8A1 Base
103 965 133
Z814A Cover
103 965 141
Z815A Cover
103 965 158
Z6A Retainer
103 965 166
4-12
To Next Page
Loading...