110-TYPE HARDWARE
8.
9.
Install labels per Attendant Console Form and Display Module Form Assignments.
Install handset bracket on left or right side of console, as desired.
Insert handset adapter on same side of handset bracket.
10.
11.
12.
Note: The handset adapter is available in two models: 854A-03 (black) or
854A-143 (burgundy).
A bracket is not required for a headset.
Connect handset cord to jack on same side of console as handset bracket.
Administer per AT&T System 75 and System 75 XE Implementation and AT&T
System 75 and System 75 XE Administration.
Figure 3-94. Connections for Attendant Console
3-128
To Next Page
Loading...