110-TYPE HARDWARE
Installing Loudspeaker Paging With Background Music
Requirements
Figures 3-124 and 3-125 show the additional connections required when loudspeaker paging is
installed with background music. Refer to the installation procedures for installing
loudspeaker paging (278A adapter and 89A control unit) and music-on-hold.
Installation Using 278A Adapter
1.
Connect music source to M1 and M2 terminals on 278A adapter (see Figure 3-124).
2.
Adjust music source level.
Installation Using 89A Control Unit
1.
Connect music source to CMS1 and CMS2 terminals on 89A control unit (see Figure
3-125).
2.
Adjust music source level.
Figure 3-124. Loudspeaker Paging With Background Music Connections—278A
Adapter
3-172
To Next Page
Loading...